Home > Airsoft Gun Batteries >

11.1v 4000mAh Li-Po Battery for RC and Airsoft

11.1v 4000mAh Li-Po Battery for RC and Airsoft

Our Price: $89.50
Our Item Number RC111-4000
Mfg Item Number: RC111-4000

Availability:: Usually Ships in 24 to 72 Hours
Product Code: RC111-4000


11.1v 4000mAh Lithium Ion Polymer High Rate Battery

High power Lithium Ion Polymer battery for Airsoft guns, RC aircraft, radio control cars, paint ball guns, and more. Our Li-Po batteries are made with the highest quality parts.

Battery Specifications: 11.1v 4000mAh Li-Po rechargeable battery, 15C Continuous Discharge, 30C Burst Discharge

  • Full 1 Year warranty against defects - See warranty page for details
  • Dimensions: 6" x 1" x 1 7/8" (150mm x 24mm x 48 mm)
  • Weight: 12oz (325g)
  • PCM protection
  • Cell Balancing connection
  • Your satisfaction guaranteed or your money back
  • See our Warranty for details
  • Learn more about Lithium-Ion Polymer Batteries
  • Visit our Battery Care Guide
  • Recommended for Upgraded Airsoft Guns
  • Available for ground shipments within U.S.A. only.

IMPORTANT Warnings and Safely Instructions

You must read and follow our safety instructions and warnings before using or charging your Lithium Polymer batteries. Failure to read and follow the instructions may result in fire, personal injury, and damage to property. In purchasing Lithium Polymer batteries from BatteryPrice the buyer/user agrees to accept all responsibilities of these risks and not to hold BatteryPrice, its Distributors and Retailers (owners and employees) responsible for any accidents, injury to persons, or property damage. Since many Radio-Controlled and Airsoft applications exceed cell manufacturer’s recommended maximum discharge rates, there is no warranty (expressed or implied) by the manufacturer, its Distributor and Retailers in the respect to the Life Cycle, Capacity, Cell Characteristics or Storage of cells/packs used in the Radio-Controlled or Airsoft market. By purchasing this battery, the buyer/user assumes all risks associated with Lithium Polymer batteries. If you do not agree with these conditions, return the battery to the store where you purchased for a refund/exchange before using.

Safety Precautions:
Lithium Polymer (herein referred to as Li-Po) cells have very strict charging requirements. As a result, please always charge Li-Po batteries with the recommended Protection Circuit Module (herein referred to as PCM) or great damage may occur. You can purchase the PCM from your retail hobby shops.

You should only use approved Li-Po chargers and never ever use a NiMH or NiCd chargers to charge Li-Po. Failure to do so may cause a fire which can result in personal injury and property damage. Please note that even though some cheap chargers indicate that they can charge Li-Po, it is not safe to do so. You should invest in a quality reputable Li-Po specific charger. Never leave Li-Po charging unattended. You should always monitor the charging process of your Li-Po so that you can react immediately to any potential problems that may occur. If your batteries start to balloon or swell up, discontinue charging immediately and follow disposal notice below. Before and after every use of your Li-Po batteries, inspect them to ensure that there is no physical damage or swelling as those are signs of imminent failure. You should also have your chargers inspected annually by its manufacturer to ensure that it is functioning properly. You should always buy factory authorized built packs instead of building your own. If you attempt to build your own, please use extreme care and have a dry fire extinguisher handy.

Always observe the correct polarity when connecting cells or packs to charger or application.

Preparation for charging:
When you receive your order from us, please read all instruction and inspect all battery packs. If there is any physical damage or puncture, contact us before attempting to use. Always install proper connector immediately after you remove the protective caps on the wire lead. Remove one protective cap and solder that lead to the connector first then follow the same procedure for the next wire lead. Be careful not to short the wire lead. If you accidentally cause the battery to short circuit, place it in a safe open space and observe the battery for approximately 15 minutes.

PCM Guard:
If utilizing the recommended PCM, never disconnect the battery from the PCM while still charging. Wait for the battery to be charged prior to disconnecting. If you sense there is a problem during the charging cycle, power off the charger or disconnect the PCM from the charger then address the problem. Not doing so can destroy the PCM Guard

Charging Instructions:
To prevent possible fire damage, it is recommended that you charge your Li-Po batteries outdoors in a fire proof container. Set voltage and current correctly to ensure that your battery will get a full charge. The charge voltage should equal the number of cells times 4.2V per cell and the current should match the capacity of the pack (or lower). Do not charge your Li-Po battery above 1C (1 x capacity). Your charger should complete charging your battery packs within one hour. Do not attempt to charge your battery if they are wired in parallel. Doing so will increase the risk of potential fire hazard and void all warranty. You should ONLY charge each battery pack individually through the PCM plug utilizing the PCM Guard.

Discharging Instructions:
Keep run time short in multiple sessions to ensure a long life cycle. Do not exceed the rated C rating or damage can occur. If you need to exceed the C rating (i.e. take off, acrobatic stunts, etc.), keep the pulse short and no more than 10 seconds. Allow for airflow over the pack in any application. This will prolong the life of the battery. Do not discharge battery to a level below 3V per cell under load. Deep discharge below 3V per cell can deteriorate life cycle and ruin your battery.

Storage & Transportation:
Store battery at room temperature in cool or shaded area. Do not expose battery packs to direct sunlight or in direct contact with any liquids. If there’s water contact, remove battery packs immediately and wipe them off with a clean towel.
Store battery in a safe container while driving. If keeping the battery in the car while driving, remove them immediately after you stop. You should never leave your battery packs in the trunk or in the car unattended as the temperatures can exceed 90F easily causing potential damage.

Life Cycle:
Life cycle of your battery depends on the extent of your C usage. The higher current you subject your Li-Po battery to, the shorter life cycle you will get. If your batteries lose 20% or more of their rated capacity, you should discontinue using the battery and follow disposal instruction below.

Damaged cells or packs:
In the event that your Li-Po batteries were involved in a crash, inspect the cells, wire leads, and connections for possible short circuit. If any cells are dented or deformed, there’s a possibility of cells damage. If in doubt, destroy the battery, as your safety is more important than a damaged battery. Follow disposal instructions below.

Operating Temperature:
Charge cycle: 32 to 120 degrees F

Discharge cycle: 32 to 140 degrees F

After use, let the battery cool down to room temperature before charging. If the battery becomes increasingly hot, stop charging or discharging immediately by shutting down your charger first; then restart only when it is safe to do so. Do not leave battery packs inside your car as extreme temperature could cause the battery to swell up and combust into flame.

Disposal Instructions:
Discharge all cells individually to 3.0 volts per cell. The cells or packs may be warm or hot during this discharge process (see above). After cooling, insulate the output terminals and dispose of your battery immediately.

Additional safety guidelines:
If you come in contact with electrolyte, scrub with soap and water immediately. In the event that electrolyte gets in your eyes, flush with cold water and seek medical attention immediately. And as always, keep all batteries and radio control equipment out of reach of children.

Product Warranty:
Product warranty is limited to original manufacturer’s defects in material and workmanship. Warranty does not cover collateral damage such as personal and property damage.